900103-00, Exhoust temperature recording system

Exhaust temperature recording system.

The ETR101A kit comes assembled and includes a datalogger (TC101A-MP) temperature sensor (thermocouple type K) water resistant enclosure interface cable (IFC200) hex screwdriver and software.

The ETR101A is an Exhaust Temperature Profiling Kit designed to profile the exhaust temperature of on-road vehicles and off-road equipment including tractor trailers buses trucks over 14000 lbs. waste water vehicles and sweepers. The ETR101A comes assembled and includes a data logger temperature sensor (thermocouple type K) weatherproof enclosure interface cable hex screwdriver and software. A ¼” NPT coupler and a compression fitting is required for assembling but not included.
Setup is fast and easy. The ¼” NPT coupler is attached to the exhaust pipe; the use of a compression fitting allows for the
thermocouple to be placed directly in the exhaust stream providing for highly accurate profiling. The data logger which is
contained within the weatherproof enclosure is then mounted to the vehicle.
Using the MadgeTech software the logger is programmed to record for a set period generally three to five days. Data is stored
in the data logger and is downloadable at any time via a pc or laptop computer. The complete temperature profile is then provided to the diesel particulate filter (DPF) manufacturer aiding in the selection of the correct DPF for the exhaust system.
Many DPF manufacturers including Donaldson Corp. recommend the use of temperature profiling equipment such as the MadgeTech ETR101A to aid in the selection of the appropriate diesel particulate filter.